I keep getting this message when reading from my Amiga Term program at the top of each message just under the subject. Not all messages, just some. I was curious how to fix it?
Attempt to draw outside of screen: 78x29 > 80x24
I keep getting this message when reading from my Amiga Term program at the t
To: HoldfastI've been using TERM 4.8. Works pretty good. I was just curious what the message meant. I'll fiddle with the settings.
Re: Attempt to draw outside of screen: 78x29 > 80x24
By: Holdfast to All on Sun Sep 10 2023 01:54 pm
I keep getting this message when reading from my Amiga Term program at the tOn a side note, what terminal program are you using? You should be able to set
it for 80x25 (or 24), usually. I've been using Term 4.8 that is pretty nice. If
you have a TCP/IP stack, I heard DCTelnet is where it's at.. but you could also
use "telser" program to use Term 4.8 with telnet/tcp. NComm and JR-Comm are a
couple other terms I heard were good that I've been meaning to try. But Term 4.8 can be set to color and 80x25 and I even found a "clean IBM" font that seems to make ANSI look quite nice. Previously, I tried Terminus and it seems I
was stuck with an odd screen res like yours on that one, though I didn't mess with its options much.
---
¨ Synchronet ¨ TIRED of waiting 2 hours for a taco? GO TO TACOPRONTO.bbs.io --- Synchronet 3.20a-Linux NewsLink 1.114
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
Sysop: | Lmorchard |
---|---|
Location: | Portland, OR |
Users: | 63 |
Nodes: | 16 (0 / 16) |
Uptime: | 241:38:39 |
Calls: | 394 |
Files: | 1 |
Messages: | 24,804 |